Gutter Repair in Seattle, WA That Holds Up to Northwest Rain

We fix sagging runs, leaking seams, failed hangers, and gutters pulling away from the house, so rainwater goes to your downspouts and not down your siding or into your foundation. You get a local crew, an honest assessment, and repairs built for Puget Sound weather.

Understanding Gutter Damage in Seattle’s Climate

Seattle’s rain problem isn’t the big downpours. It’s that the rain never lets up. The city gets about 39 inches a year, spread over roughly 150 wet days, and from October through April that usually means steady rain that keeps your gutters working for weeks straight. When a fall atmospheric river stalls over the Sound, one gutter run on a two-story house can carry hundreds of gallons in an afternoon. Any weak point gets tested again and again until it gives: a seam whose sealant has dried out, a hanger that has lost its grip, or a section that no longer slopes toward the downspout.

The other half of the problem is weight. Big-leaf maples line the streets in Wallingford and around Green Lake, and Douglas firs and cedars shade lots in West Seattle and Magnolia. All of them drop leaves, needles, and cones straight into gutters. Once that debris is soaked, it’s heavy. A clogged gutter holding standing water, wet leaves, and moss washed off the roof can carry far more load than its hangers were spaced for. The results are sections that slowly bow, hangers that bend or strip their screws, and gutters that start leaning away from the fascia board.

Winter adds its own stress. Seattle doesn’t stay frozen for long, but we get enough nights below freezing to cause damage, especially up on Queen Anne and Capitol Hill. Water trapped in a clogged gutter freezes, expands, and pries at seams and end caps. The windstorms that come in off Puget Sound every fall and winter then catch gutters that are already loose and pull them further off the house. Many older Craftsman homes and early-1900s bungalows in Ballard and Fremont have been through decades of this, and the fascia behind the gutter has often gone soft too. That’s why we check the wood as well as the metal before we call a repair finished.

The Advantages of Professional Gutter Repair

We Fix the Cause, Not Just the Leak

We find out why a seam is leaking or a section is sagging, so the same problem doesn’t come back next rainy season.

We Protect What’s Behind the Gutter

A gutter that works keeps water off your fascia, siding, and foundation. Water damage in those places costs far more to fix than the gutter does.

Repair Instead of Replace

Most sagging, leaking, or loose gutters can be restored for a fraction of what a full new system costs.

What Makes Gutter Repair Effective and Lasting

A repair that lasts starts with a clean, dry gutter and a look at the whole system. Sealant won’t hold over grime and old caulk, and you can’t judge slope in a gutter full of fir needles. We clear the damaged run first. Then we check every seam, corner, end cap, and downspout outlet, and we look closely at the fascia board the gutter hangs from. Most repairs come down to four things:

• Resealing seams and corners: We scrape out the failed sealant, clean the joint down to bare metal, and apply a gutter-grade sealant made to flex through temperature swings.
• Replacing hangers and brackets: We take out bent, rusted, or backed-out fasteners and replace them with screw-set hidden hangers spaced about every two feet.
• Correcting slope: We re-pitch the run so water flows to the downspout, at roughly a quarter inch of fall for every ten feet.
• Reattaching to the fascia: We fasten into solid wood, and point out any rotted fascia so it gets fixed first.

A quick fix often looks fine on a dry afternoon: a bead of household caulk smeared over a leaking seam, or a gutter pushed back up without checking its pitch. Then the first long November storm arrives and it fails again, sometimes taking fascia and soffits with it.

Professional Gutter Repair vs. DIY in Seattle

Some gutter jobs are fair game for a handy homeowner: clearing a downspout, tightening a loose screw from a short stepladder, or resealing a small end-cap drip on a dry day. Stop when the work means climbing to second-story or roof height, common on the steep lots of Queen Anne, Magnolia, and Capitol Hill. A tall ladder on sloped, wet ground is a real hazard, and matching materials is harder than it looks — older Seattle homes may have 5-inch or 6-inch K-style aluminum, half-round profiles, or galvanized steel, and mixing metals can cause corrosion that eats through the gutter from the fastener outward.

If your gutters or roof are still under warranty, a bad repair can hand someone a reason to deny a claim later. We use compatible materials and explain exactly what we did, and a local company is accountable for the result.

Gutter Repair Services Across Seattle, WA

We repair gutters on homes all over Seattle: Ballard, Fremont, Wallingford, Green Lake, Phinney Ridge, Greenwood, Capitol Hill, Queen Anne, Magnolia, Montlake, Madison Park, Ravenna, Laurelhurst, Maple Leaf, Wedgwood, Beacon Hill, Columbia City, Mount Baker, and all across West Seattle from Alki to Fauntleroy, plus the greater Puget Sound area. Call (206) 555-0100 and we’ll confirm we cover your address.

What Seattle Homeowners Are Saying

Best Sagging Gutter Repair Near Wallingford
“The gutter across the back of our 1920s Craftsman had been drooping for two winters. They showed us exactly where the old hangers had pulled loose, rehung the whole run, and fixed the slope. It got through the November storms without a single drip.” — Megan R., Wallingford

Best Leaking Gutter Seam Repair in Ballard
“Every time it rained, water poured out of the corner right above our front steps. They stripped out the old caulk, resealed the corner and both end caps, and adjusted the pitch. Fair price, and nobody tried to sell us new gutters.” — Daniel K., Ballard

Best Windstorm Gutter Reattachment in West Seattle
“A windstorm pulled a section of our gutter halfway off the house. They reattached it into solid wood with new brackets and checked the rest of the gutters while they were up there.” — Priya S., West Seattle

Gutter Repair FAQs for Seattle Homeowners

How do I know if my gutters need repair instead of cleaning?

Your gutters need repair instead of cleaning if they leak at the seams or corners, sag, pull away from the house, or overflow even when they’re empty. Cleaning fixes clogs; repair fixes the gutter itself. If you’re not sure which you have, we can inspect and tell you what’s actually going on.

Can a sagging gutter be fixed without full replacement?

Yes. Most sagging gutters can be fixed by installing new hangers, re-pitching the run, and fastening it into solid fascia. Replacement only makes sense when the gutter itself is badly bent, rusted through, or split in several places.

How much does gutter repair cost in Seattle?

Most gutter repairs in Seattle cost roughly $150 to $600, depending on what’s wrong and how high the gutter is. We quote the job after seeing the gutter and before any work begins.

Why are my gutters leaking at the seams?

Gutter seams leak when the sealant between sections dries out, cracks, or pulls away from the metal. The right fix is to strip the old sealant, clean the joint, and reseal it with a gutter-grade product — spreading new caulk over the old won’t last.

Why is my gutter pulling away from the house?

A gutter pulls away from the house when its hangers fail or the fascia board they’re screwed into has rotted, usually from heavy loads of wet leaves and needles, often finished off by a Puget Sound windstorm. The repair is to reattach the gutter into sound wood with new hangers.

How much slope should my gutters have?

Gutters should slope toward the downspout about a quarter inch for every ten feet of run. Too little slope and water pools; too much and the gutter looks crooked and can overflow at the low end.

When is the best time to repair gutters in Seattle?

Late summer or early fall, before the rainy season starts in October, so sealant can cure properly. A gutter that’s actively pulling off the house shouldn’t wait for the season, though — call us any time of year.

Can you repair gutters on a tall house in Queen Anne or Capitol Hill?

Yes. We repair gutters on two- and three-story homes in Queen Anne, Capitol Hill, Magnolia, and Seattle’s other hillside neighborhoods, with ladders and safety equipment suited to the height and the slope of the ground.

Don’t Wait for the Next Storm

Don’t wait for the next atmospheric river to find the weak spot in your gutters. Call Seattle Gutter Cleaning at (206) 555-0100 for an honest gutter repair assessment anywhere in Seattle.